View EKM8053CM_628395.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

eKM8053
USB & PS/2 Optical Mouse Controller
1. General Description
The eKM8053 is a Mouse Controller designed to control both USB & PS/2 Optical Mouse device. This Mouse Controller can auto detect USB or PS/2 mode, and supports X,Y,Z three axes , and L, R, M, P and N five buttons under both USB and PS2 mode.
2. Features
Universal Serial Bus Specification, version 1.1 USB HID Specification, version 1.1 Auto-detecting PS/2 port or USB port. Compatible with Microsoft 3D PS/2 mouse. Support 3D (X,Y,Z) 5 Key (L,R,M,P,N) input. Support Z/2 Z-axis input type. Support Agilent HDNS-2051 & 2610 & 2620 Optical Mouse Sensor. Firmware simulates 800DPI for 2610/2620 Optical Sensor. Applications 3D, 3 Buttons USB and PS/2 Combo Mouse 3D, 5 Buttons USB and PS/2 Combo Mouse. Package 18 Pin PDIP (300MIL) eKM8053BP 3D 3K 18 Pin SOP (300MIL) eKM8053BM 3D 3K 20 Pin PDIP (300MIL) eKM8053CP 3D 5K 20 Pin SOP (300MIL) EKM8053CM 3D 5K
1
This specification is subject to be changed without notice
Revision1.01 (5300)
2006/7/11
eKM8053
USB & PS/2 Optical Mouse Controller
3. Pin assignment
eKM8053B (18-Pin) for 3D3Buttons
4 3 2 1 18171615
CPIS L KEY R KEY M KEY SCLK K_OP VSS V3.3 OSCI
1 2 3 4 5 6 7 8 9
18 17 16 15 14 13 12 11 10
Z1 Z2 IR_C PD SDIO D+ / CLK D- / DATA VDD OSCO 5 6 7 8
(0,0)
+
14 X 9 101112 13
eKM8053B (18-Pin) Symbol
CPIS L KEY R KEY M KEY SCLK K_OP VSS V3.3V OSCI OSCO VDD D- / DATA D+ / CLK SDIO PD IR_C Z2 Z1
Bounding PAD Function
I/O
I I I I I/O I O I I/O I/O I/O I/O I I/O I I
PIN
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 400/800 CPI Selection Pin Left Key Input Right Key Input Middle Key Input
V3.3 : 800 CPI
GND : 400 CPI
Serial Clock to Agilent sensor IC SCLK 3D3K/3D5K Selection Pin GND 3.3V DC voltage output from internal regulator. This pin has to be tied to a 4.7 6MHz ceramic resonator input. Return path for 6-MHz ceramic resonator. 5 V Power Input USB D- or PS/2 Data I/O USB D+ or PS/2 CLK I/O Serial Data from Agilent sensor IC SDIO 2051 Power Down Pin IR Control Pin#1 Z axis Input 2 Z axis Input 1 F capacitor. Connect to V3.3 for 3D3K Pull Low 1Mohm to GND for 3D5K
2
This specification is subject to be changed without notice
Revision1.01 (5300)
2006/7/11
eKM8053
USB & PS/2 Optical Mouse Controller
eKM8053C (20-Pin) for 3D5Buttons
4 3 2 1 20191817
CPIS L KEY R KEY M KEY SCLK P KEY/K_OP VSS VSS V3.3 OSCI
1 2 3 4 5 6 7 8 9 10
20 19 18 17 16 15 14 13 12 11
Z1 Z2 IR_C PD SDIO N KEY D+ / CLK D- / DATA VDD OSCO 5 6 8 9 16 15 10111213 14 (0,0)
+
eKM8053C (20-Pin) Symbol
CPIS L KEY R KEY M KEY SCLK K_OP P KEY VSS V3.3V OSCI OSCO VDD D- / DATA D+ / CLK N KEY SDIO PD IR_C Z2 Z1
Bounding PAD Function
I/O
I I I I I/O I I O I I/O I/O I/O I I/O I I/O I I
PIN
1 2 3 4 5 6 6 7,8 9 10 11 12 13 14 15 16 17 18 19 20 400/800 CPI Selection Pin ; Left Key Input Right Key Input Middle Key Input
V3.3 : 800 CPI
;
GND : 400 CPI
Serial Clock to Agilent sensor IC SCLK 3D3K/3D5K Selection Pin Previous KEY Input GND 3.3V DC voltage output from internal regulator. This pin has to be tied to a 4.7 6MHz ceramic resonator input. Return path for 6-MHz ceramic resonator. 5 V Power Input USB D- or PS/2 Data I/O USB D+ or PS/2 CLK I/O Next KEY Input Serial Data from Agilent sensor IC SDIO 2051 Power Down Pin IR Control Pin#1 Z axis Input 2 Z axis Input 1 F capacitor. Connect to V3.3 for 3D3K Pull Low 1Mohm to GND for 3D5K
3
This specification is subject to be changed without notice
Revision1.01 (5300)
2006/7/11
eKM8053
USB & PS/2 Optical Mouse Controller
4. Function description
Fig-1 : Function block
Quadrature Signal Timing Diagram
Z Axis Counting
Z /2 C O U N T IN G
Z1 Z2 +1 +1 -1 -1
Quadrature Output Crossed Width Limit
Z1 Z2 T T T T T T T T
Note
For Z Axis ,T > 1ms
4
This specification is subject to be changed without notice
Revision1.01 (5300)
2006/7/11
eKM8053
USB & PS/2 Optical Mouse Controller
PS/2 function description
PS/2 Mouse Commands Description Hex Code
FF FE F6 F5 F4 F3,XX F2 F0 EE EC EB EA E9 E8 E7 E6
Command
Reset Resend Set Default Disable Enable Set Sampling Rate Read Device Type Set Remote Mode Set Wrap Mode Reset Wrap Mode Read Data Set Stream Mode Status Request Set Resolution Set Autospeed Reset Autospeed
eKM8051 echo code
FA,AA,00 XX,(XX,XX) FA FA FA FA,FA FA,00 FA FA FA FA,XX,XX,XX FA FA,XX,XX,XX FA,FA FA FA
Microsoft PS/2 scrolling mouse & 3D5K mode
(A) Entering procedure of PS/2 scrolling mouse: Except in WRAP mode, while eKM8051 received the following consecutive command. i. F3 C8 ---- set sampling rate 200/sec ii. F3 64 ---- set sampling rate 100/sec iii. F3 50 ---- set sampling rate 80/sec (B) Entering procedure of 3D5K mode: after eKM8051 enter scrolling mouse mode (Mouse ID = 03), while eKM8051 received the following consecutive command.eKM8051 will enter 3D5K mode (Mouse ID:04) i ii iii F3 C8 ------- set sampling rate 200/sec F3 C8 ---- set sampling rate 200/sec F3 50 ---- set sampling rate 80/sec
(C) Operating in PS/2 scrolling mouse: a. All of the commands in legacy mode still be valid. b. The ID code of read device type command (F2) will changed from "00" to be "03". c. Data report will be four bytes format:
5
This specification is subject to be changed without notice
Revision1.01 (5300)
2006/7/11
eKM8053
USB & PS/2 Optical Mouse Controller
3D3Buttons Data Format
Byte 1
2 3 4
Bit 0 1 2 3 4 5 6 7 0-7 0-7 0-7
Description Left button status; 1 = pressed Right buttson status; 1 = pressed Middle button status; 1 = pressed Reserve to 1 X data sign; 1 = negative Y data sign; 1 = negative X data overflow; 1 = overflow Y data overflow; 1 = overflow X data (D0-D7) Y data (D0-D7) Z data (D0-D7)
(D) Operating in 3D5K mode: a. All of the commands in legacy mode still be valid. b. The ID code of read device type command (F2) will changed from "03" to be "04". c. Data report will be four bytes format:
3D5Buttons Data Format
Byte 1
2 3 4 4 4 4
Bit 0 1 2 3 4 5 6 7 0-7 0-7 0-3 4 5 6,7
Description Left button status; 1 = pressed Right button status; 1 = pressed Middle button status; 1 = pressed Reserve to 1 X data sign; 1 = negative Y data sign; 1 = negative X data overflow; 1 = overflow Y data overflow; 1 = overflow X data (D0-D7) Y data (D0-D7) Z data (D0-D3) P KEY status; 1 = pressed N KEY status; 1 = pressed Reserve to 0
(E) Exiting Microsoft scrolling mode & 3D5K mode: There are two ways to exit: a. Power off. b. Reset command (FF). Z-axis Input Function : The Z0-Z7 limit value is 7 Z-axis counter accumulates the Z1, Z2 phase changed by movement. This mode includes noise immunity. Z/2 : 2 dot per count. The wheel should stay at Z1=0, Z2=0 or Z1=1, Z2=1 Phase
6
This specification is subject to be changed without notice
Revision1.01 (5300)
2006/7/11
eKM8053
USB & PS/2 Optical Mouse Controller
USB function Description
Each Descriptor in USB Mode Descriptor Type
Device Descriptor
Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Byte8
12 VID1 00 09 32 09 00 09 00 07 05 A1 15 05 01 00 00 02 01 80 06 81 09 05 25 95 09 25 C0 03 02 09 01 01 30 7F C0 04 A1 19 95 75 09 75 00 01 01 KEY1 KEY2 31 08 0A 09 29 75 81 09 95 01 KEY1 01 03 38 03 21 11 01 00 01 22 34 04 00 00 01 03 01 02 01 VID0 01 02 22 00 01 01 00 A0 10 PID1 01 00 00 00 00 08 02 PID0 REV1 REV0
Configuration Descriptor Interface Descriptor HID Descriptor Endpoint
HID Report Descriptor
81 05 15 81
*VID *PID *REV *KEY1 *KEY2
Vendor ID (Default = 0x04F3) Product ID (3D3K MOUSE = 0x0213 , 3D5K MOUSE = 0x0214) Revision Number = 0x5300 3D3K MOUSE = 3, 3D5K MOUSE = 5 3D3K MOUSE = 5, 3D5K MOUSE = 3
USB Mouse Report Data Type Byte0 Byte1 Byte2 Byte3
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
0
Bit7
0
Bit6
0
Bit5
N
Bit4
P
Bit3
M
Bit2
R
Bit1
L
Bit0
X-AXIS
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
Y-AXIS
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
Z-AXIS
*3D3K MODE , P = N = 0.
7
This specification is subject to be changed without notice
Revision1.01 (5300)
2006/7/11
eKM8053
USB & PS/2 Optical Mouse Controller
5. Absolute Maximum Rating
Symbol Temperature under bias Storage temperature Input voltage Output voltage min 0 -65 -0.5 -0.5 Max 70 150 6.0 6.0 unit C C V V
6. Electrical Characteristic
(T = 25C, VDD=4.4~5.2V, VSS=0V)
Symbol Parameter Condition 3.3V Regulator VRag VResetL VResetH IIL VIHX VILX VHL VOH VOL IPH IPL Output voltage of 3.3v Regulator Low Power Reset detecting low Voltage Low Power Reset detecting high Voltage MCU operating Input Leakage Current for input pins Clock Input High Voltage Clock Input Low Voltage VIN=VDD,VSS OSCI OSCI GPIO Pins High/Low level transfer point Output High Voltage Output Low Voltage Input current with pull-high resister Input current with pull-low resister Input IDrive = 5.0mA ISink = 5.0mA The input pin with internal pull-high resistor of Port6 or port7 is connected to VSS. The input pin with internal pull-low resistor of Port6 is connected to VDD. USB Interface VOH VOL VDI VCM VSE CIN VRG RPH Static Output High Static Output Low Differential Input Sensitivity Differential Input Command Mode Range Single Ended Receiver Threshold Transceiver Capacitance Output Voltage of Internal Regulator Internal Pull-high Resistor (USB Spec 5%) USB operation Mode USB operation Mode 2.8 0.2 0.8 0.8 3.0 -20% 1.5 3.6 0.3 2.5 2.0 20 3.6 +20% V V V V V pF V k 2.4 1.1 25 330 0.4 V V V A A 2.5 1 1.0 A V V 2.4 VDD = 4.2V ~ 5.2V 3.0 3.3 3.6 2.3 V V V Min Type Max Unit
8
This specification is subject to be changed without notice
Revision1.01 (5300)
2006/7/11
eKM8053
USB & PS/2 Optical Mouse Controller
7. Package Diagram
PDIP-18L 300MIL PACKAGE OUTLINE DIMENSION(Unit:mm)
PDIP-20L 300MIL PACKAGE OUTLINE DIMENSION(Unit:mm)
9
This specification is subject to be changed without notice
Revision1.01 (5300)
2006/7/11
eKM8053
USB & PS/2 Optical Mouse Controller
SOP-18L 300MIL PACKAGE OUTLINE DIMENSION(Unit:mm)
SOP-20L 300MIL PACKAGE OUTLINE DIMENSION(Unit:mm)
10
This specification is subject to be changed without notice
Revision1.01 (5300)
2006/7/11
eKM8053
USB & PS/2 Optical Mouse Controller
8. Pad List Information
eKM8053B Pad Configuration
4 3 2 1 18171615
(0,0)
+
5 6 7
8
14 X 13 9 101112
eKM8053B Pad Name & Coordinate Table
Chip Size 1520*2580 UM Pad Name CPIS L_KEY R_KEY M_KEY SCLK K_OP VSS V3.3 OSCI OSCO VDD D_MNS D_PLUS NC SDIO PD IR_C Z2 Z1
Pad Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 11
Pad Coordinate (X, Y) 196.5, 1176.7 91.5, 1176.7 -13.5, 1176.7 -118.5, 1176.7 -652.7, -785 -652.7, -890 -652.7, -997.5 -304.45, -1182.6 44.3, -1182.6 149.3, -1182.6 256.9, -1182.6 364.4, -1182.6 647.3, -1015.8 647.3, -901.6 647.3, -796.6 616.5, 1176.7 511.5, 1176.7 406.5, 1176.7 301.5, 1176.7
Revision1.01 (5300)
This specification is subject to be changed without notice
2006/7/11
eKM8053
USB & PS/2 Optical Mouse Controller
eKM8053C Pad Configuration
4 3 2 1 20191817
(0,0)
+
5 6 8
9
16 15 10111213 14
eKM8053C Pad Name & Coordinate Table
Chip Size 1520*2580 UM Pad Name CPIS L_KEY R_KEY M_KEY SCLK P_KEY/K_OP VSS V3.3 OSCI OSCO VDD D_MNS D_PLUS N_KEY SDIO PD IR_C Z2 Z1
Pad Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 12
Pad Coordinate (X, Y) 196.5, 1176.7 91.5, 1176.7 -13.5, 1176.7 -118.5, 1176.7 -652.7, -785 -652.7, -890 -652.7, -997.5 -304.45, -1182.6 44.3, -1182.6 149.3, -1182.6 256.9, -1182.6 364.4, -1182.6 647.3, -1015.8 647.3, -901.6 647.3, -796.6 616.5, 1176.7 511.5, 1176.7 406.5, 1176.7 301.5, 1176.7
Revision1.01 (5300)
This specification is subject to be changed without notice
2006/7/11
eKM8053
USB & PS/2 Optical Mouse Controller
9. Application Circuit
NOTICE DIAGRAM
ADNS2051_2
13 C8
+
VDD XA YB XB YA SCLK PD SDIO R_BIN
OSC_OUT
11 18M
C7
2 3 4 5
OSC_IN XY _LED REFA
9 6 7 0.1uF 2.2uF
+
V3.3
1 1
SW_DPI_800 2 SW_DPI_400 2 eKM8053C
1 V3.3
Z1 Z2 IR_C PD SDIO N D+/CLK D-/DATA VDD OSCO
15 16
REFB
8
1 2 3 4 5 6 7 C9
4.7uF
+
CPIS L R M SCLK P / K_OP VSS VSS V3.3 OSCI
20 19 18
1 1 Z-AXIS
2 GND GND 2
10
HLMP-ED80
14 R_LED
12
17 16 15 14 13 12 11 C6
+
R4 R3 R2 R1
Q1 3904
8 9 10
R_5K 1M
VDD
C5
C4
+
C3
C2
+
C1
D+ / CLK D- / DATA VSS
30P
6M
30P
SHLD PORT
COMPONENTS IN DETAIL
TYPE NORMAL APPLICATION EFT BETTER IMPROVEMENT TYPE NORMAL APPLICATION EFT BETTER IMPROVEMENT R1 10 33 C4 C5 10uF 10uF 33 C6 0.1uF(104) C7 0.1uF(104) C8 4.7uF C9 4.7uF R2 R3 R4 1.5K C1 10uF C2 0.1uF(104) 0.1uF(104) C3
C5 & C6 have to be closed to MCU(VDD) C7 & C8 have to be closed to Sensor(VDD). C9 has to be closed to MCU(V3.3) CPIS is HIGH LEVEL(3.3V) for 800DPI LOW LEVEL(GND) for 400DPI R_5K is connected to V3.3 for 3D3Key Type or 1M PULL-Low to GND for 3D5Key Type
R_LED For ADNS2051 15 R_LED For ADNS26X0
) LED BIN R_LED( ) K/L/M/N LED BIN R_LED(K K/L/M/N/P Q R S T U
15~18
P
15~22
Q
15~27
R
15~33
S
15~37
T
68.9
78.9
93.1
113
137
Revision1.01 (5300)
169 2006/7/11
13
This specification is subject to be changed without notice
eKM8053
USB & PS/2 Optical Mouse Controller eKM8053B_Mechanical Z/2 3D3Key Application For ADNS2051
ADNS2051_3
1 C9 HAS TO be clos ed to V3.3(MCU) 2 C3 & C4 HAVE TO be clos ed to VDD(MCU) 3 C5 & C6 HAVE TO be clos ed to VDD(SENSOR) 4 CPIS(MCU) PIN is tied to GND for 400DPI or 3.3V for 800DPI 5 Check Notice Table for R_LED
4.7uF +
13 0.1uF2
VDD XA YB XB YA SCLK PD SDIO R_BIN
OSC_OUT
11 18M
C6
C5 3
4 5 1
OSC_IN XY _LED REFA
9 6 7 0.1uF 2.2uF
+
V3.3
1 1
SW_DPI_800 2 SW_DPI_400 2 eKM8053A
15 V3.3
Z1 Z2 IR_C PD SDIO D+/CLK D-/DATA VDD OSCO
REFB
8
16 14 R_LED
GND GND
10 12
HLMP-ED80
1 2 3 4 5 6 7 8 9 C9
4.7uF
+
CPIS L R M SCLK K_OP VSS V3.3 OSCI
18 17 16 15 14 13 12 11
1 1 Z-AXIS
2 2
1.5K
Q1 3904
10
VDD +
0.1uF 10 C4
10uF C3
0.1uF C2
+
10uF C1
D+ / CLK D- / DATA VSS
20P
6M
20P
SHLD PORT
eKM8053B_Mechanical Z/2 3D3Key Application For ADNS26X0
1 C9 HAS TO be clos ed to V3.3(MCU) 2 C3 & C4 HAVE TO be clos ed to VDD(MCU) 3 C5 & C6 HAVE TO be clos ed to VDD(SENSOR) 4 CPIS(MCU) PIN is tied to GND for 400DPI or 3.3V for 800DPI 5 Check Notice Table for R_LED
4.7uF + 7 0.1uF
ADNS26X0_4 VDD OSC_OUT
R_LED 2 100K 24M
OSC_IN HLMP-ED80
C6
V3.3
1 1 SW_DPI_800 2 SW_DPI_400 2 eKM8053A_7
C5
4
SCLK
1 5 8
+
1K 2.2uF
LED_CNTL REFA
Q2 3906
V3.3
Z1 Z2 IR_C PD SDIO D+/CLK D-/DATA VDD OSCO
1 2 3 4 5 6 7 8 9 C9
4.7uF
+
CPIS L R M SCLK K_OP VSS V3.3 OSCI
18 17 16 15 14 13 12 11 0.1uF 10 C4
1 1 Z-AXIS
2 2
3
SDIO
GND
6
1.5K
Q1 3904
10
VDD +
10uF C3
0.1uF C2
+
10uF C1
D+ / CLK D- / DATA VSS
20P
6M
20P
SHLD PORT
14
This specification is subject to be changed without notice
Revision1.01 (5300)
2006/7/11
eKM8053
USB & PS/2 Optical Mouse Controller eKM8053C_Mechanical Z/2 3D5Key Application For ADNS2051
1 C9 HAS TO be clos ed to V3.3(MCU) 2 C3 & C4 HAVE TO be clos ed to VDD(MCU) 3 C5 & C6 HAVE TO be clos ed to VDD(SENSOR) 4 CPIS(MCU) PIN is tied to GND for 400DPI or 3.3V for 800DPI 5 Check Notice Table for R_LED
4.7uF + 13 0.1uF2
ADNS2051_7 VDD XA YB XB YA SCLK PD SDIO R_BIN REFB OSC_IN XY _LED REFA OSC_OUT
11 18M 9 6 7 0.1uF 2.2uF
+
C6
C5 3
4 5
V3.3
1 1
SW_DPI_800 2 SW_DPI_400 2 eKM8053C_1
1 V3.3
Z1 Z2 IR_C PD SDIO N D+/CLK D-/DATA VDD OSCO
8
15 16
1 2 3 4 5 6 7 C9
+
CPIS L R M SCLK P/K_OP VSS VSS V3.3 OSCI
20 19 18
1 1 Z-AXIS
2 GND GND 2
10
HLMP-ED80
14 R_LED
12
17 16 15 14 13 12 0.1uF 11 C4
+
1.5K
Q1 3904
8 9
4.7uF
10
VDD
1M 10
10uF C3
0.1uF C2
+
10uF C1
D+ / CLK D- / DATA VSS
20P
6M
20P
SHLD PORT
eKM8053C_Mechanical Z/2 3D5Key Application For ADNS26X0
1 C9 HAS TO be clos ed to V3.3(MCU) 2 C3 & C4 HAVE TO be clos ed to VDD(MCU) 3 C5 & C6 HAVE TO be clos ed to VDD(SENSOR) 4 CPIS(MCU) PIN is tied to GND for 400DPI or 3.3V for 800DPI 5 Check Notice Table for R_LED
V3.3
1 1 ADNS26X0_6
R_LED 2 100K 24M
OSC_IN HLMP-ED80
7 4.7uF + 0.1uF
VDD
OSC_OUT
C6
SW_DPI_800 2 SW_DPI_400 2 eKM8053C_7
C5
4
SCLK
1 5 8
+
1K 2.2uF
LED_CNTL REFA
Q2 3906
V3.3
Z1 Z2 IR_C PD SDIO N D+/CLK D-/DATA VDD OSCO
1 2 3 4 5 6 7
CPIS L R M SCLK P /K_OP VSS VSS V3.3 OSCI
20 19 18 17 16 15 14 13 12 0.1uF 11 C4
1 1 Z-AXIS
2 2
3
SDIO
GND
6
1.5K
Q1 3904
1M
+
C9
4.7uF
8 9 10
10
VDD +
10uF C3
0.1uF C2
+
10uF C1
D+ / CLK D- / DATA VSS
20P
6M
20P
SHLD PORT
15
This specification is subject to be changed without notice
Revision1.01 (5300)
2006/7/11
eKM8053
USB & PS/2 Optical Mouse Controller
ELAN (HEADQUARTER) MICROELECTRONICS CORP., LTD. Address : No. 12, Innovation 1st. Rd. Science-Based Industrial Park, Hsinchu City, Taiwan. Telephone: 886-3-5639977 Facsimile : 886-3-5639966 ELAN (H.K.) MICROELECTRONICS CORP., LTD. Address : Rm. 1005B, 10/F, Empire Centre, 68 Mody Road, Tsimshatsui, Kowloon, Hong Kong. Telephone: 852-27233376 Facsimile : 852-27237780 E-mail : elanhk@emc.com.hk ELAN MICROELECTRONICS SHENZHEN, LTD. Address : SSMEC Bldg. 3F , Gaoxin S. Ave. 1st , South Area , Shenzhen High-tech Industrial Park., Shenzhen Telephone: 86-755-26010565 Facsimile : 86-755-26010500 ELAN MICROELECTRONICS SHANGHAI, LTD. Address : #23 Building No.115 Lane 572 BiBo Road. Zhangjiang, Hi-tech Park, Shanghai Telephone: 86-21-50803866 Facsimile : 86-21-50804600 Elan Information Technology Group. Address: 1821 Saratoga Avenue, suite 250, Saratoga, CA 95070, USA Telephone: 1-408-366-8225 Facsimile : 1-408-366-8220 Elan Microelectronics Corp. (Europe) Address: Dubendorfstrasse 4, 8051 Zurich, Switzerland Telephone: 41-43-2994060 Facsimile : 41-43-2994079 Email : info@elan-europe.com Web-Site : www.elan-europe.com
Copyright (c) 2004 ELAN Microelectronics Corp. All rights reserved. ELAN owns the intellectual property rights, concepts, ideas, inventions, know-how (whether patentable or not) related to the Information and Technology (herein after referred as " Information and Technology") mentioned above, and all its related industrial property rights throughout the world, as now may exist or to be created in thefuture. ELAN represents no warranty for the use of the specifications described, either expressed or implied, including, but not limited, to the implied warranties of merchantability and fitness for particular purposes. The entire risk as to the quality and performance of the application is with the user. In no even shall ELAN be liable for any loss or damage to revenues, profits or goodwill or other special, incidental, indirect and consequential damages of any kind, resulting from the performance or failure to perform, including without limitation any interruption of business, whatever resulting from breach of contract or breach of warranty, even if ELAN has been advised of the possibility of such damages. The specifications of the Product and its applied technology will be updated or changed time by time. All the information and explanations of the Products in this website is only for your reference. The actual specifications and applied technology will be based on each confirmed order. ELAN reserves the right to modify the information without prior notification. The most up-to-day information is available on the website http://www.emc.com.tw.
16
This specification is subject to be changed without notice
Revision1.01 (5300)
2006/7/11

▲Up To Search▲

Price & Availability of EKM8053CM

	To Download EKM8053CM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .